Skip to main content

AI Solar System Estimator

Enter your average monthly energy use and your location's peak sun hours (readily available from solar atlases). The estimator divides out system losses (default 14%, covering inverter, wiring, soiling and temperature) to size the array in kW, then converts to a panel count for your chosen panel wattage and an approximate roof area. Output is a planning estimate — a real design adds shading analysis, orientation, stringing and structural checks.

Ask in plain words

The AI reads your question and fills in the parameters; a verified calculator engine does every calculation.

How to use the AI Solar System Estimator

  1. Find your average monthly kWh on a recent electricity bill.
  2. Look up your area's peak sun hours (solar atlas or PVWatts).
  3. Keep 14% losses unless you have a better estimate; set your target offset.
  4. Press Calculate for array kW, panel count and approximate roof area.

How the calculation works

Daily energy = monthly kWh × offset ÷ 30.44. Array kW = daily energy ÷ (sun hours × (1 − losses%)). Panel count = ceil(array kW × 1000 ÷ panel W). Roof area ≈ panels × 2.1 m² (includes walkways-free module footprint). The 14% default loss factor follows standard residential PV planning practice; production varies by weather and orientation.

Example questions

  • “900 kWh/month, 5 peak sun hours, 550 W panels”
  • “Offset a 400 kWh bill with 4.8 sun hours and 14% losses”
  • “My home uses 12000 kWh a year — size a system for 6 sun hours”

Prefer doing it yourself? These dedicated calculators run the same verified formulas.

Questions you type are sent to the configured AI provider only to extract parameters; they are not stored. Results are computed locally by deterministic engines and are not advice.

Command Palette

Search for a command to run...