RLC Impedance Calculator
Series RLC impedance, phase angle and resonant frequency.
The formula behind it
Z = √(R² + (XL − Xc)²); φ = atan((XL − Xc) ÷ R)- Z
- impedance magnitude in ohms — the total AC opposition
- φ
- phase angle: positive = inductive (current lags), negative = capacitive (current leads)
- fr
- resonance: 1 ÷ (2π√(LC)), where XL = Xc and Z is minimum
Series RLC impedance combines resistance with the difference of two opposite reactances as a right triangle: Z = √(R² + X²) with phase angle atan(X/R). Sweep the frequency and net reactance crosses zero at resonance — Z bottoms out at R, current peaks, and radio tuning exploits exactly that. The power-factor line converts the phase angle into the number the energy bill cares about.
How to use this calculator
- 1
Enter R (Ω), L (mH), C (µF) and the signal frequency in Hz.
- 2
Press Calculate — Z, the phase angle, the power factor and the resonant frequency appear.
- 3
Set the frequency to the shown resonant value and confirm the reactances cancel, leaving Z = R.
Worked examples
Tuned circuit
R 10 Ω, L 10 mH, C 1 µF at 1.6 kHz sits near fr ≈ 1.592 kHz → Z ≈ 10 Ω.
Capacitive region
Same circuit at 500 Hz: Xc dominates, φ negative, current leads.
Frequently asked questions
Related calculators
Capacitive Reactance Calculator
Xc = 1/(2πfC) — capacitors pass highs, block DC.
Inductive Reactance Calculator
XL = 2πfL — coils choke high frequencies.
Power Factor Calculator
pf = W/VA (or kW/kvar) with phase angle and quality band.
Ohm's Law Calculator
Enter any two of voltage, current and resistance to derive the rest — plus electrical power in watts.